Masterclock NTDS29 Bedienungsanleitung PDF herunterladen (Seite 10)

Masterclock NTDS Series User Manual – v2 – December 2012

DEFAULT CONFIGURATION

The factory defaults may be restored by using the WinDiscovery

program, Telnet or by using the reset button at the rear of each

clock. On dual face clocks, the reset button is located on the top.

Your NTDS clock/device ships from the factory with the following

configuration as defined below. The NTDS firmware interprets

the incoming time as UTC.

Configuration

Masterclock NTDS clocks maintain their configuration data in

non-volatile flash memory, even when the power is off. Our

NTDS clocks are configured on screen using either Telnet, or

WinDiscovery software.

The factory default configuration:

SETTING

CONFIGURATION SELECTION

Enabled

DHCP/BootP provided network configuration

Enabled

DHCP provided NTP server address entry

Enabled

Query (Unicast) NTP client

Disabled

Time Zone offset

Disabled

Automatic Daylight Savings Time adjustment

Enabled

Telnet access

DHCP/BOOTP AUTO-CONFIGURATION

DHCP (Dynamic Host Configuration Protocol) is a mechanism

for automating the configuration of network devices that use

TCP/IP. When DHCP is enabled, DHCP configuration acquisition

will overwrite any manual configuration items.

Factory default: DHCP enabled.

BOOTP was a precursor to DHCP. The network device can obtain

configuration from a BOOTP server when no DHCP server is

present.

SETTING

CONFIGURATION

SELECTION

Disabled

Time Zone Offset

Disabled

Daylight Savings Time

Enabled

NTP Client with DHCP

Enabled

24 Hour format

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

Masterclock NTDS29 Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Wanduhren Masterclock NTDS29