Masterclock NTDS46 Bedienungsanleitung

NTD-SERIES NETWORK TIME PROTOCOL CLOCK - DATE DISPLAY (Series II) USER MANUAL www.masterclock.com Tel: 636-724-3666 Fax: 63

NTD Clocks User Manual - Rev 2.2.2 Jan-10 6 © Masterclock®, Inc Major Feature Overview The network clocks can be configured using one of the followi

NTD Clocks User Manual - Rev 2.2.2 Jan-10 7 © Masterclock®, Inc The device name may be changed from the factory default name by entering a unique na

NTD Clocks User Manual - Rev 2.2.2 Jan-10 8 © Masterclock®, Inc NTP Addressing Modes Unicast (Query) The network clock supports the unicast method

NTD Clocks User Manual - Rev 2.2.2 Jan-10 9 © Masterclock®, Inc must be enabled and configured for multicasting addressing to be implemented properl

NTD Clocks User Manual - Rev 2.2.2 Jan-10 10 © Masterclock®, Inc Configuration Methods Basic operation of the network clock is configured via the Wi

NTD Clocks User Manual - Rev 2.2.2 Jan-10 11 © Masterclock®, Inc Clicking on any device group will list in the right pane of the WD window all devic

NTD Clocks User Manual - Rev 2.2.2 Jan-10 12 © Masterclock®, Inc Properties The network configuration may be viewed in a summary form under the Prop

NTD Clocks User Manual - Rev 2.2.2 Jan-10 13 © Masterclock®, Inc duplicate IP address condition, the network clock will be re-assigned a fallback IP

NTD Clocks User Manual - Rev 2.2.2 Jan-10 14 © Masterclock®, Inc Device Settings Each network clock can be configured to display time (or date) in t

NTD Clocks User Manual - Rev 2.2.2 Jan-10 15 © Masterclock®, Inc The default, well-known port for NTP service is 123. This can be changed as desir

DISCLAIMER The information contained in this document is subject to change without notice. Masterclock, Inc. (hereinafter MC) makes no warranty of

NTD Clocks User Manual - Rev 2.2.2 Jan-10 16 © Masterclock®, Inc The Broadcast/Multicast timeout period (in minutes) is adjustable when this mode is

NTD Clocks User Manual - Rev 2.2.2 Jan-10 17 © Masterclock®, Inc Display Control The lower half of the window configures the time/date displayed on

NTD Clocks User Manual - Rev 2.2.2 Jan-10 18 © Masterclock®, Inc Daylight Saving Time Settings The Daylight Saving Time button, also included in the

NTD Clocks User Manual - Rev 2.2.2 Jan-10 19 © Masterclock®, Inc Serial Port Option Parameters The NTD clock contains both an RS232 and RS485 serial

NTD Clocks User Manual - Rev 2.2.2 Jan-10 20 © Masterclock®, Inc [Note: Enabling serial port detection of attached devices by selecting the checkbo

NTD Clocks User Manual - Rev 2.2.2 Jan-10 21 © Masterclock®, Inc User Display Control The User Display Control button allows for the enabling and ut

NTD Clocks User Manual - Rev 2.2.2 Jan-10 22 © Masterclock®, Inc ‘Remember this password for the session’ checkbox to eliminate typing the password

NTD Clocks User Manual - Rev 2.2.2 Jan-10 23 © Masterclock®, Inc [Note: When the network clock has access to NTP servers, information obtained via

NTD Clocks User Manual - Rev 2.2.2 Jan-10 24 © Masterclock®, Inc [Troubleshooting Tip: In addition to the standard status indications, the network

NTD Clocks User Manual - Rev 2.2.2 Jan-10 25 © Masterclock®, Inc Reset Device The network clock may be reset with a soft reset to allow the device

NTD Clocks User Manual Rev 2.2.2 - Jan-10 © Masterclock®, Inc. Table Of Contents Introduction ...

NTD Clocks User Manual - Rev 2.2.2 Jan-10 26 © Masterclock®, Inc To initiate a Telnet session in Windows, select the Run Command Line interface from

NTD Clocks User Manual - Rev 2.2.2 Jan-10 27 © Masterclock®, Inc Set Device Name To set the device name, select this menu option. Enter the desired

NTD Clocks User Manual - Rev 2.2.2 Jan-10 28 © Masterclock®, Inc Set NTP Client Parameters The NTD clocks are set to query for NTP on a regularly sc

NTD Clocks User Manual - Rev 2.2.2 Jan-10 29 © Masterclock®, Inc Set Digital Display Intensity The digital clock display intensity is controlled w

NTD Clocks User Manual - Rev 2.2.2 Jan-10 30 © Masterclock®, Inc Enable/Disable User Control of Digital Display The digital display clock may be u

NTD Clocks User Manual - Rev 2.2.2 Jan-10 31 © Masterclock®, Inc RS-232 Terminal Configuration The recommended method of configuring the NTD clock i

NTD Clocks User Manual - Rev 2.2.2 Jan-10 32 © Masterclock®, Inc Troubleshooting Tips [Important Note: WinDiscovery uses bi-directional UDP messag

NTD Clocks User Manual - Rev 2.2.2 Jan-10 33 © Masterclock®, Inc 1. The WinDiscovery application has been open for too long and the clock configura

NTD Clocks User Manual - Rev 2.2.2 Jan-10 34 © Masterclock®, Inc • If static IP addressing is being used the original conflicting static IP address

NTD Clocks User Manual - Rev 2.2.2 Jan-10 35 © Masterclock®, Inc Problem: Clock did not properly negotiate the Daylight Savings Time to standard tim

NTD Clocks User Manual Rev 2.2.2 - Jan-10 © Masterclock®, Inc. Troubleshooting Tips ...

NTD Clocks User Manual - Rev 2.2.2 Jan-10 36 © Masterclock®, Inc Problem: Colons are flashing for several seconds when I apply new configuration se

NTD Clocks User Manual - Rev 2.2.2 Jan-10 37 © Masterclock®, Inc Possible reasons/solutions: 1. You have entered and “remembered” an incorrect pass

NTD Clocks User Manual - Rev 2.2.2 Jan-10 38 © Masterclock®, Inc Specifications Type 4 Digit Time Displays 6 Digit Time/Date Displays Model NTD24 N

NTD Clocks User Manual - Rev 2.2.2 Jan-10 39 © Masterclock®, Inc Communications – Protocol • DHCP (enabled by default) configuration, or via Stati

NTD Clocks User Manual - Rev 2.2.2 Jan-10 40 © Masterclock®, Inc • Relative Humidity ...Up

NTD Clocks User Manual- Rev 2.2.2 - Jan-10 41 © Masterclock®, Inc. LIMITED WARRANTY This Masterclock, Inc. (hereinafter MC) product warranty exten

NTD Clocks User Manual- Rev 2.2.2 - Jan-10 42 © Masterclock®, Inc. Appendix A - WinDiscovery Global Password Feature A significant feature has been

NTD Clocks User Manual- Rev 2.2.2 - Jan-10 43 © Masterclock®, Inc. Enabling Global Password • Enable the global password feature by selecting the

NTD Clocks User Manual- Rev 2.2.2 - Jan-10 44 © Masterclock®, Inc. Changing the Global Password • Disable the global password feature in WinDiscove

NTD Clocks User Manual- Rev 2.2.2 - Jan-10 45 © Masterclock®, Inc. • Re-enable the global password feature by selecting the “Enable Global Password

NTD Clocks User Manual - Rev 2.2.2 Jan-10 1 © Masterclock®, Inc Introduction Network Time Display (NTD) is a series of versatile, multi-featured Net

NTD Clocks User Manual - Rev 2.2.2 Jan-10 2 © Masterclock®, Inc Display Type Four Digit Digital Time • 12 hour (with PM indicator) time •

NTD Clocks User Manual - Rev 2.2.2 Jan-10 3 © Masterclock®, Inc Installation Operating Environment The NTD series is not water or moisture proof

NTD Clocks User Manual - Rev 2.2.2 Jan-10 4 © Masterclock®, Inc AC Versions: AC models of the NTD clock are supplied with an IEC power cord POE

NTD Clocks User Manual - Rev 2.2.2 Jan-10 5 © Masterclock®, Inc After application of power, the network clock will go through an internal self-test.